These are all genuine and not cherry picked. Posted exactly as they were written by the customers, regardless of whether they are good, bad or ugly.
“Hi Paul, Just to let you know the new rods worked a treat. I’m very pleased with them. The wood burner was very easy to sweep. The first rod and brush went into the flue with ease (usually a struggle using traditional rods) and the rest of the flue was swept without any problems. I had a very clear indication when the brush had entered the cowl – much more so than using traditional rods. Today I swept the Aga flue which I was a bit nervous about as it has 2 x 45 degree bends in the flue and this was the first time I have swept it since the flue was replaced last year. I took it slowly and the brush went up through the 2 x 45 degree bends without any resistance and reached the cowl without any problems.
So I am very pleased with the rods and brushes. Well worth the money. Kind regards, Anthony”.
Anthony R. Holsworthy, Devon.
“Hi Paul, Have used the rods a few times now. I really appreciate how I can sweep from the ground instead of having to get onto the roof and sweep from the top down.
We have a Rayburn 355 with central heating boiler, the flue gasses are always cooled by the boiler, so we have creosote build-up no matter how dry, or how hot we have the fire, we burn Australian hard woods, and thus, sweeping monthly is required. If we get damp wood, then we need to clean promptly after discovering its damp.
With your flexible rods and brush, most of the harder deposits are removed, and we can extend our wire brush sweep due to sweeping weekly from the ground.
I am pleased that we invested in a set of flexible rods from you, it was a gamble for us since we did not have anywhere to try prior to purchasing.
Very glad we did, its a valuable addition to our sweeping program. Kind regards.”
Grant H. Clare, South Australia.
“Paul, Thank you. My order arrived at it’s destination as promised, Dec. 23- great service! I picked it up after Christmas and used it yesterday to clean my chimney. I’ve attached a photo of the bottom of my chimney, where the clean-out is located. Very tight quarters and a sharp angle to get the cleaning brush into the chimney. The rods are flexible enough to negotiate this bend and allow me to clean my chimney from the bottom, rather than having to climb onto my roof. So far your product is working as advertised for me! Thanks again.”
John H. British Columbia, Canada.
“Just a quick note to say how very pleased I am with these rods. I lined my chimney last year with a 5″ stainless liner. These are the only rods out there which, because of the absence of metal fittings, will not snag a costly liner. They are an absolute delight to use. I have an offset in my flue…barely felt any change in resistance. The flue brush is fantastic: a photo up the stove pipe after sweeping revealed a very clean surface. Prior to assembling the rods I used a little silicone grease on all the threads (I’m a plumber, so always have some to hand) which not only prevented cross-threading, but also kept any soot out from the threads . Great piece of kit. Highly recommend. Thanks again Paul.”
Andrew C. Niton, Isle of Wight.
“Hi Paul, Woohoo job done! Rayburn chimney bunged up – with a 6 week wait for chimney sweep – time for some DIY ‘cos snow forecast and Christmas imminent .
Also done Jotul log burner. Now need to order 6″ brush for main log burner. This is going to work out very cost effective methinks.Regards,”
Clive W. Wigton, Cumbria.
“Well Paul had a chance to use your rods and brush today. All I can say is WOW, wish I had known these existed years ago.I have 22ft 8″ of stainless steel liner inside a 10″ by 10″brick chimney with an 8″ SS tee just above the clean out. I removed my 7” flue which is about only 2 ft . It slid up the chimney with ease turning inside the 90 degree tee very easy I just continued to screw on each rod as I went up. I went right to the top then I told my son I have to make a wish before I go out to see it which I did. I pulled it back down inside my stove(wood furnace room) and my son helped me just curled a bit then I pushed it right back up again right to the top. I unscrewed each section as I pulled it down and wiped with damp cloth. Got a mirror and looked up the liner it was clean as a whistle. Only thing I am concerned about is the threads on the rods getting damaged but i put the little tubes which you included with them for protection. No more getting on roof tops for me to clean chimneys. Thank God! or Thank Paul! I will show your product to all my friends over here who are in the same situation as me who has to climb on the rooftop to clean their chimneys. If anyone is sitting on the fence trying to decide will this product work for for me wait no longer because it will work perfectly. I had my doubts as well but no more. If some people think maybe the price is a bit steep. Well can you put a price on your life by falling off a rooftop trying to clean your chimney. Don’t think so! Thank You Paul and Merry Christmas and a Happy New Year from our ours to yours! One Happy Customer Just across the pond as they say..”
Craig H. Baie Verte. Newfoundland, Canada.
“Hi Paul, Just received my Flexirods today. Ordered on the 15th and received on the 20th. Super fast shipping. Already ran it through the chimney. Worked great and fast. Easily went thru a 90° and 2 – 45° bends. After using your Flexirods, I wouldn’t use anything else ever again. Cheers.”
Howard S. Florence, MT, USA.
“Good morning, I just wanted to let you know we rec’d the flexi chimney rods this past week and cleaned our woodstove chimney on Saturday. Even with the bends in our chimney, the rods made it through and cleaned it. We were quite impressed. You definately have a great product. Thank you.”
Dara C. Westover, PA, USA.
“Hello Paul, Just a few lines to say how happy I am with your product, its true what people say ‘you only get what you pay for’, I can honestly say that your rods are a real piece of 1st class material, well done and I wish you many happy years of trading. Kind regards. Gilbert.”
Gilbert D. Wadebridge, Cornwall.
“Hey Paul, Really happy with your product. Simple to use and cleans it no problem. You’re advice on the telephone was much appreciated too. Every blessing.”
Craig D. Scottish Borders.
“Received your flexi rods this morning. Swept the flue this afternoon – did the job so easily – a pleasure to use. Also, plenty of help from Paul over the phone. Many thanks. A great product.”
Martin B. Liskeard, Cornwall.
“Hello Paul, Just wanted to let you know that we received your rods on Friday and tried them out on Saturday. Worked a treat, made it round all our bends with ease. Such a relief as this was our third set! All of the others were far too stiff to make the bends. Thankyou for your help and feedback. Greetings from Holland.”
Helen P. Zevenhuizen, Netherlands.
“Hi Paul, The rods and brushes were delivered on time, Just used them on my two wood burners and my daughters Wood burner. I can not stress how much easier they are compared to my conventional rods,they are great. The only concern I had, was a couple of the rods had ruff threads on the male ends,so were a bit stiff to screw together when using the first time, I was worried about cross threading them. when doing the third flue, one of them was getting much freer to put together. The rest of the rods are fine. I think a little care is needed not to scrape the male ends of the rods on ruff floors ect. and damaging the threads (they are nylon not hard metal) Apart from this little gripe, I would still recommend them, they are just so easy to use. Regards Dave R.”
David R. Driffield, East Yorkshire.
“Hello, We purchased your rods from watching your YouTube video. Our chimney flue and liner have a 45 then a 30 then another 45 degree bend and we thought this would be difficult to sweep. But I cannot stress how good the rods and brush are they went up the flue with no problems I am very pleased with the product. Thanks Alex.”
Alex E. Doncaster, Nottinghamshire.
“Hello. Your rods are ideal for a DIY person such as myself as they are easy to use and did not cause damage to my new flue liner. I had to replace my previous liner because a ‘Professional’ sweep used the old type heavy duty rods and stiff brush and damaged it beyond repair“.
Christopher W. Kington, Herefordshire.
“Paul, Really looking forward to getting these brushes. I bought so called top of the range power sweep brushes and they wrecked my liner within 2 years due to the metal fixings and I was gutted. So glad that these brushes have been developed from all nylon and I will certainly pass on your website to everyone I know so that they can get them and not end up being caught out like I did. Thanks, Ed”.
Edward T. St. Austell, Cornwall
“Hi Paul, I would just like to let you know that the rods and brush I ordered last Thursday (2nd Mar.) were delivered on Monday afternoon, 3 working days UK to Ireland very good. I had a few questions about the product which were answered very swiftly via email before I placed my order. I used them for the first time on Tuesday morning and they were a pleasure to use. I will only need to sweep my chimney two more times then they will have paid for themselves. I would defiantly recommend these. Regards, John”.
John I. Ballyhaunis, Co Mayo, Republic of Ireland
“Paul. The rods and brush head arrived yesterday….all intact. Today saw me having my first ever attempt at sweeping. Whilst I’m not quite in the same league as Dick Van Dyke in Mary Poppins, they were so easy to use that I feel it won’t be long! Thank you so much for all your help and advice. Very much appreciated. Kind regards”.
Geoff L. Sandown, I.o.W
“Thank you for the swift despatch of my order. Definitely does “what it says on the tin”, but, if I may suggest an extra bit of kit?
A small handle to facilitate turning the brush and rod string, particularly when round a 90 degree bend would be helpful”.
Peter D. Beith, North Ayrshire
“Hello Paul, the rod set I purchased from you is fantastic and an absolute must have for anyone with stainless steel liners, I have two and was very concerned that the normal drain/chimney rods would certainly scratch or damage their internal integrity when sweeping! your flexi rod set did the job easily with only one sweep and obviously did not damage or scratch the internal surface at all, the nylon flexi rods move easily up or down the flue with no snagging due to the chamfered connectors, the spiral design of the brush cleans with out a lot of twisting and the soot nicely passes through it, being a retired Fire officer I have used rods on chimney fires many times during my career and this was the easiest sweep ever, a great investment and I will easily recoup the cost of them on next years clean, they are very study yet ultra flexible and I am sure they will last a lifetime, I would highly recommend them to anyone. Very quick postage BRILLIANT! A1++++++”
Kevin F. Grimsby, North East Lincolnshire
“Thank you! Excellent product, well packaged, efficiently dispatched and delivered!”.
Graeme K. Stowmarket, Suffolk.
“hi paul, thanks for supplying these. Used them last weekend and took about 5 mins to do the aga chimney. easy and no problems getting round 5 bends. chris”.
Chris W. Sheffield Park, East Sussex.
“Hi, We have today received our chimney rods and we are delighted with them. Great product and will save us a lot of money doing it ourselves. We will be recommending these to our friends. Kind regards”.
Emma H. Radstock, Somerset.
“Hi, thank you for the rods and brush I recently ordered. I have finally got round to using them and am pleased to say they perform just as promised. With my woodburner I normally undo and remove the flue above the stove to insert the drain rods and basic chimney brush I previously used. I still did this for my first use of the Flexirods and quickly cleaned the chimney. After reassembling the flue and stove I thought I\’d try inserting the Flexirods up through the stove after removing the internal fire brick lining. I was very dubious of doing this as the aperture is fairly small and my previous brush and Bailey rods would never have gone through without damaging the stove and flue. I\’m very happy to say your rods and brush went up and through fairly easily which now gives me the confidence to clean the chimney more often as I won\’t have to dismantle the flue each time which creates more mess and hassle and is quite time consuming. The only very small niggle I have is the delivery from Royal Mail was a bit slow, didn’t help I was excited to get hold of them to test them out. (yes I am sad enough to get excited about chimney cleaning rods) And to top it all my wife is very happy as included in the package was a pair of small gloves she can use for gardening, shame there wasn\’t any to fit my extra large hands! I would thoroughly recommend the Flexichimneyrods”.
Dave M. Oxford, Oxon.
“Paul..just done.. very good product and service ..just finished cleaning log burner flue ..piece of cake ..also good advice on brush with cone to prevent liner damage , thanks jb”.
John B. Worthing, W.Sussex
“Very pleased, thank you”.
Christine M. Camarthen, Camarthenshire
“Exellent service done the job a treat & very quick delivery 10/10”.
Micheal B. Leeds, W. Yorkshire
“Your rods managed to negotiate the 90 degree bend through the top of my Rayburn cooker cover plate hole, up into the 6″ enamel flue and on into the 8″ s.s. liner – excellent result!”.
Steve S. Norman Cross, Peterborough
“Fantastic – Very 🙂 happy with purchase”.
Diane M. Whytleafe, Surrey
“Hi, just a few lines to say how pleased we are with the chimney rods which we have recently purchased, we are more than happy with the price and quality, thank you for your fast response. I will definitely recommend you to friends and family”.
Mike W. Hamworthy, Dorset
“Hi.Paul Thanks for very quick delivery.I used them this morning on my three wood burners.Excellent!All done in no time at all.One of the stoves had a 90 degree start bend and it coped with it adequately after a little initial coaxing.Thanks again for great product, Alan”.
Alan T. Melksham, Wiltshire
“I must admit when I first received the rods I wasn’t sure. But after using them several times my doubts were overcome. They are very good to use and I am extremely pleased with them. A good product that I will recommend to anyone. Thanks again and for the gloves”.
John L. Market Rasen, Lincolnshire
“Excellent personal attention to my order by Paul. Great product!”
Micheal L. Aberystwyth, Ceredigion
“Would recommend, great service”.
Jennifer W. Walsall, W. Midlands
“Delighted with product, service and price”.
Sue S. Loughboro, Leicester
“Very pleased with my purchase, good eBay seller”.
Ronald H. Birmingham, W. Midlands
“Really fast service – v.good, thanks”.
Charlotte M. Hevingham, Norfolk
“Super fast delivery. Great quality product & communications. Recommended seller”.
Simon K. Milford Haven, Pembrokeshire
“Very nice ebayer with fast transaction and nice items”.
Taku T. Harrow, London
“Excellent eBayer, great service, fast post, A1, THANKS”.
Derek S. Accrington, Lancashire
“As described, good quality, delivered quickly, would buy another, A+”.
Pauline G. Southampton, Hampshire
“Recieved in good order and used same day. The rods and brush are really good products. I would recommend to anyone with a wood burning stove”.
Martin S. Stoke-on-Trent, Staffordshire
“Having never attempted to sweep our chimney ourselves, we were really pleased to discover how easily the rods and brush were to use. Our flue has a couple of sharp-angled bends, making the task more difficult. However, with a little gentle persuasion, the rods popped out of the chimney top and we were able to bring down an incredible amount of soot & debris on the downward journey.
we are delighted wit both the product and service. Thank you”.
Roy B. Newcastle Emlyn, Carmarthanshire
“Thanks Paul. Very pleased with the results after using your product on my awkward angled chimney breast. It was easy to assemble and worked a treat. Please feel free to add this as a testimonial on your web site”.
Zane C. Bournemouth, Dorset
“Hi Paul, I ordered from you on the 9th Nov and the package arrived today 15th Nov in southern France. Well done to you and to Parcel Force for a great delivery.
I opened up and connected 4 rods and a 5″ brush to sweep a log burner flu with 2x 45° bends. It worked perfectly, easily going round the bends led by the ball on the brush head. 10 minutes later the job was done, cleaned up and gear put back in the packaging for storage. Second flu to be done at the weekend.
To get the same job done by an artisan costs around 100€ per flu, so return on investment is one sweep of 2 flues. Value balanced this coming weekend.
What can I say? Great product and service. Glad I found you on YouTube.
Good luck and best regards”.
Tony R. Pelleport, France
“Thank you Paul. The Rods are excellent! works great on a 10m chimney with two 45 degree bends.It is the first time I can clean the chimney right from the stove without disassembling the 4 pipes that goes to the ceiling.The 6 inch brush fits & cleans the 6 inch chimney as expected.
Its smart & simple, very flexible, and easy to work with. The idea of no metal parts is great – no scratches to the flue liners.
Order & payment were very easy, and the delivery was fast. I highly recommend it!”
Uri Y. Jerusalem, Israel
“Hello Paul, I swept the flue today, which was a task long overdue. As I previously explained, I have to go through the stove into the pipes, around three bends, before the brush even gets to the flue liner, which itself has a slight curve prior to the vertical. It didn’t require too much extra force to drive the brush around the bends, and I managed it with only the five rods. The brush shifted a lot of soot and debris from the flue, doing a great job.
The rod and brush set are excellent, and they’ll pay for themselves after only two sweeps compared to the cost of getting a chimney sweep to do it. The pair of gloves you sent free of charge was a really nice gesture and very much appreciated.
I have no hesitation in recommending this product, if it can get around my unusual configuration of pipes, bend and flue liner, it’ll do the job on any chimney. Many thanks. Yours sincerely, David”
David M. Cumbernauld, North Lanarkshire
“Hi Paul. Thanks for your advice. The 6 inch brush turned out to be fine for the job. I had previously wasted money on a cheaper kit which I then found couldn’t navigate round the offset entrance to my wood stove chimney. Your flexi rods and brush are of a much higher quality and have been able to do the sweep quickly and efficiently. An altogether worthwhile investment! Regards, Nick”
Nick B. Pitlochry, Pethshire